🤚 Tool Info
🤚 Do Not Hack
🐾 Owner: Pawprint Prototyping
This is a model B09RBHV2D1 12" thermal laminator. It is usually located in the lower-right desk drawer in the office.
Manual
- Plug the laminator in.
- Read the manual while it heats up (3-5 minutes).
- Carefully peel apart one of the pouches located in the same drawer as the laminator.
- Triple-inspect the laminator pouch for dust, and remove any if necessary.
- Put something in the pouch.
- Carefully close the two halves of the pouch around the something.
- Use the white brayer roller (in the vinyl desk drawer) to ensure the laminated pouch is in full contact with the something.
- Select 3 mil or 5 mil on the laminator with the switch.
- Ensure that the green "ready" light is on and the laminator has heated up to operating temperature.
- Carefully push the object to be laminated through the front slot.
- Enjoy responsibly.
| Date |
Event |
| 8/14/2025 |
Initial documentation. |