Lanolin Sheep (Prusa Mk4)
Lanolin Sheep (Prusa Mk4)
🤚 Tool Info
Certification Required
🤚 Do Not Hack
🐾 Owner: Twitchy
Description
Prusa Mk4 by Prusa Research of Jospeh Prusa.
0.4mm nozzle
Has both Smooth and texture PEI plates.
| Material | Build Plate | Diffculty | Notes |
|---|---|---|---|
| PLA | Smooth/Texture | Easy | |
| PETG | Texture | Easy | Use dry material |
| TPU/Flex | Texture/Smooth+Blue tapeMedium | Medium | Watch for jams |
| ASA | Smooth | Medium | Made for UV exposure |
| PVB | Smooth | Medium | IPA smoothing |
| PC | Texture | Hard | Requires high temps and atmosphere |
Safety and Certification
3D print certification required
Hazards
Nozzle and bed are heat hazards, verfiy temperature.
Electrical harzard, be careful for pacemakers or other electrical hazards.
Moving robot, be weary of pinching.
Prohibited Operations
Do not hack or damage equipment in the name of repairs.
Pre-flight checklist
- Check settings to make sure proper print bed is installed
- Make sure wanted material is loaded.
- Make sure proper machine/material is selected in Slic3r.
Operation checklist
- Make sure first layer is applied without errors.
Post-flight checklist
- Remove nozzle primer line.
- Make sure build plate is clear and clean of all filament.
Maintenance
Official Prusa Mk4 Manual.
https://www.prusa3d.com/downloads/manual/prusa3d_manual_MK4_MK39_103_en.pdf
Prusa Github.
https://github.com/prusa3d
Tool History
| Date | Event |
|---|---|