Pawprint Prototyping Wiki

Epson ST 2000

Subby (EPSON WorkForce ST-2000 Color Printer and Scanner)

🤚 Tool Info

🤚 Do Not Hack

🐾 Owner: Pawprint Prototyping

EPSON ST-2000

Don't use this for normal printing. Do use it for fancy dyesub printing.

Description

A wireless colo(u)r printer and scanner, modified for dyesub,

Wireless Printing

When the printer is on, it usually auto-connects to the Pawprint Prototyping wifi, and any other computers on the wifi should be able to automatically see the printer.

You can check that the printer is handling connections correctly through HTTP server. It can be found at the address subby.infra.pawprint.space.

Scanning

Scanning is most easily done by downloading the EPSON scanning driver, which can be downloaded here:

Scanning is supported over the wifi. You may need to plug in the printer IP address into the driver to get a working connection, as detecting the printer automatically may fail.

Safety and Certification

No certifications are required to scan or print. Don't touch wet ink and spread it around the shop. The ink can take a bit to dry, and sometimes may never dry without additional coating or lamination.

Hazards

Printers may cause a loss of sanity.

Maintenance

Refilling Ink

This printer uses thick dyesub ink, do not fill with normal ink

See the installation guide above for visual instructions.

Refilling ink can be done through the flap on the top right of the printer, underneath the scanner unit. Lift up the scanner unit and open up the cap for the ink type you wish to refill. Do NOT shake or squeeze the ink bottles. The ink will stop flowing once the maximum ink level has been reached.

Tool History

Date Event